How to Set Up Scanner Antennas for the Best Reception

Background

This knowledge base article provides a detailed set of instructions on how to properly set up scanners in the factory. 

Steps to Follow

1. Scanner Placement
   Try to set up the antenna in the highest possible position and with a direct line of sight to the WiFi access point (for a stronger signal).
   
   
   
2. Antenna Orientation -  Ensure that the antenna is correctly aligned and oriented. The antenna direction should be directed upward with the antenna free of obstacles from a 360° angle.
   
   

   Incorrect setup	Correct setup

   
   

3. Extendable Antenna.
   If there is not enough space to install the device in a higher position, you can use an antenna extender or extension cord as an alternative solution. This will allow you to place the scanner in a convenient location while still maintaining a strong antenna reception.
   
   PLEASE NOTE: This should be a 2.4ghz 5dmi or higher antenna extension RP-SMA SMA Male Antenna.
   
   Example:
   
   
   

4. Signal Interference
   Identify potential sources of interference within the factory and also take into account the surrounding metal machines that may affect the signal quality.
   

   
   
   
   

5. Check Signal Strength
   Check the device's signal strength indicator or use a smartphone app to identify areas with stronger reception. Position the device in those areas.
   
   
   

   Weak Signal

   
   

   Good Signal

   
   
6. Consult the Bitberry Team
   If there are any further questions or need specific guidance on optimizing antenna reception in a factory.