Modify a Stock – Bar Count

Before you begin

Below are the steps to take to modify a Stock – Bar count. These steps begin with the following assumptions:

• You are viewing the count you wish to modify (See Find and View a Count)
• The count type of the count is Stock – Bar (See Change a Count’s Count Type)

Steps to take

Take the following steps to modify a Stock – Bar count:

1. If required, tap in the Type of Bars in Bundle field and select the type reinforcing bar being counted.
   
   
   
2. If required, tap in the Number of Bars in Bundle field then enter the number of reinforcing bars (in one identical bundle) in being counted.
   
   
3. If required, tap in the Number of Identical Bundles field then enter the number of identical bundles of reinforcing bars being counted.
   

The total number of reinforcing bars, length of bars, weight per metre, and total weight of bars is calculated and displayed at the end of the Details section.

After following the steps above, you may wish to:

• Create another count in the same section (See Create a Count from a Count)
• Delete the count (See Delete a Count)