About the device The BitConnect device is a simple device which connects a factory machine console to a wireless or wired network in order to receive cut and bend instructions over a network. The BitC...
Before you begin It is highly recommended you have a DHCP reservation for the BitConnect device Have on hand the serial communications settings required by the factory machine Have an antenna connecte...
Overview There are occasions when you might want to reset a BitConnect device back to factory defaults. The BitConnect device doesn't seem connect to the specified Wi-Fi network The Before you begin T...
Overview In order to make the best use the BitConnect device, it's important to mount it in as convenient location as possible. Considerations There are a couple of things to consider when looking to ...
Background This Knowledge Base Article provides step-by-step instructions on how to set up a BitConnect Device on an MEP 2E Machine aswell as an MEP New Machine. Before you begin Ensure to check whic...
Before you begin After tapping Apply, the device will prompt to reboot. Rebooting is not necessary at every step and can simply be done as the final step. Steps to take Access the wi-fi networks avail...
Background To maintain heat traceability, data is required from Steel Suppliers to match Mill Certificate data to the final item being produced. Sometimes this data is partially available from the He...